The coating machine has made revolutionary improvements in methods such as brushing, greatly increasing production power and product quality. If the three prevention paint accidentally gets on the skin, it must be cleaned with soap water or detergent as soon as possible. If it doesn't enter the eyes carefully, today we will briefly introduce the operation of the bus interface and the continuous upgrading demand brought by the clock speed higher than 400 MHz.
During the coating operation, experiments must be carried out in accordance with the relevant provisions of the military standard to meet the necessary environmental habits requirements. Needle valves should not be used to poke other objects to prevent damage to the needle valve. If the valve gun is not used for more than 24 hours, it should also be cleaned. The tools used for painting must be cleaned with diluent after use every day, and the waste liquid generated after cleaning should be collected in a sealed rubber bucket.
Please strictly follow the operating instructions for the coating machine, curing furnace, and other equipment, maintain and inspect the equipment as required, and pay attention to wearing anti-static gloves. In addition to the aforementioned randomness, the temperature is below 30 ℃, away from open flames, and the development and commercialization of two types of plasma deposited polymer films are used for external coating and conformal coating of PCB operations, There is a special report on our process steps and equipment/equipment details. After spraying paint every 24 hours, the paint inlet pipe of the spray gun must be removed, and an appropriate amount of diluent must be equipped with spray irrigation and sprayed more than 10 times.
